The Accurex Lipid Profile Meter is a portable Blood Lipid Analysis System designed for quantitative point-of-care measurement of important lipid parameters using compatible Accurex dry-chemistry test strips.
With the compatible LPS-101 3-in-1 Lipid Profile Test Strip, the system directly measures:
and can calculate:
This makes the Accurex system different from a basic Total Cholesterol meter such as QuikCheck, which measures only one cholesterol parameter.
Important purchasing information: this listing is for the Accurex Lipid Profile Meter. Compatible lipid test strips are sold separately and are required for testing.
View Compatible Accurex Lipid Profile Test Strips – 25 Pack →
| Specification | Accurex Lipid Profile Meter |
|---|---|
| Product Type | Blood Lipid Analysis System / Lipid Profile Meter |
| Platform | LPM-101 |
| Measurement Principle | Reflectance photometry / photochemical dry chemistry |
| Total Cholesterol – TC | Directly measured |
| HDL Cholesterol | Directly measured |
| Triglycerides – TG | Directly measured |
| LDL Cholesterol | Calculated when applicable |
| TC/HDL Ratio | Calculated |
| Supported Specimens | Capillary whole blood, venous whole blood, serum and plasma |
| LPS-101 Sample Volume | Approximately 35 µL |
| Single-Parameter Strip Sample | Approximately 10 µL |
| Test Time | Approximately 120 seconds |
| Memory | Up to 500 records |
| Units | mg/dL or mmol/L |
| Operating Temperature | Approximately 10°C–35°C |
| Strip Storage | Approximately 2°C–30°C |
| Power | Built-in rechargeable lithium battery |
| Compatible Strip References | LPS-101, TCS-101, TGS-101, HLS-101 |
The Accurex system is designed for broader lipid testing than a conventional Total Cholesterol-only meter.
With the compatible LPS-101 3-in-1 lipid panel, it directly determines:
TC + HDL + TG
and then uses those results to calculate:
LDL + TC/HDL Ratio
| Lipid Parameter | How the Accurex System Reports It |
|---|---|
| Total Cholesterol | Directly measured |
| HDL Cholesterol | Directly measured |
| Triglycerides | Directly measured |
| LDL Cholesterol | Calculated |
| TC/HDL Ratio | Calculated |
No.
With the LPS-101 lipid panel, LDL is calculated from the directly measured Total Cholesterol, HDL and Triglyceride values.
The LPM-101 platform uses the applicable calculation:
LDL = TC − HDL − TG/5
when lipid values are expressed in mg/dL and the calculation conditions are applicable.
Calculated LDL should not be confused with a direct laboratory LDL assay.
| Parameter | Approximate Measurement Range |
|---|---|
| Total Cholesterol | 100–500 mg/dL |
| HDL Cholesterol | 15–100 mg/dL |
| Triglycerides | 45–650 mg/dL |
If a result falls outside the applicable analytical range, the meter may display an out-of-range indication rather than an exact numerical value.
The Accurex / LPM-101 system uses reflectance photometry with dry-chemistry test strips.
During testing:
This analytical design allows several lipid parameters to be measured in a compact point-of-care format.
The LPM-101 platform supports multiple designated strip references.
| Strip Reference | Test |
|---|---|
| LPS-101 | 3-in-1 Lipid Panel – TC + HDL + TG, with calculated LDL and TC/HDL ratio |
| TCS-101 | Total Cholesterol |
| TGS-101 | Triglycerides |
| HLS-101 | HDL Cholesterol |
Use only the test strips designated for the Accurex Blood Lipid Analysis System.
Read the Accurex Lipid Test Strip Compatibility Guide →
Microsidd currently lists the compatible Accurex Lipid Profile Test Strips – 25 Pack separately from the meter.
With the compatible LPS-101 configuration, one test can directly measure:
and the meter can calculate:
Buy Accurex Lipid Profile Test Strips – 25 Pack →
This product listing is for the Accurex Lipid Profile Meter / Blood Lipid Analysis System.
Lipid profile test strips are not included with this product listing and must be purchased separately.
The reusable meter cannot perform a lipid test without the appropriate compatible disposable strip.
Before ordering the meter, consider ordering the corresponding test strips at the same time if you do not already have compatible stock.
For the LPS-101 3-in-1 lipid panel, the manufacturer specifies approximately:
35 µL of specimen
for one test.
The single-parameter TCS-101, TGS-101 and HLS-101 strip configurations use a smaller sample of approximately:
10 µL
Follow the instructions supplied with the exact strip being used.
The LPM-101 platform provides TC, HDL and TG results in approximately:
120 seconds / 2 minutes.
This allows rapid quantitative lipid testing in appropriate point-of-care settings.
The Accurex LPM-101 platform supports:
The meter includes specimen-type settings, and the selected mode should correspond to the actual sample being tested.
Specimen preparation and anticoagulant requirements differ between sample types.
Read: Accurex Capillary vs Venous Blood, Serum & Plasma Guide →
The Accurex lipid system uses a code chip associated with the current test-strip pack.
When beginning a new strip box:
Do not assume that a code chip from another strip lot or another strip type is interchangeable.
The Accurex Blood Lipid Analysis System can store up to approximately:
500 test records.
This can be useful in professional workflows where previous point-of-care results need to be reviewed.
The LPM-101 platform uses a built-in rechargeable lithium battery.
This supports use in clinics, screening programmes and other environments where portable testing is useful.
The meter should have adequate charge before beginning a testing session.
Manufacturer documentation states that testing should not be performed while the meter is actively charging.
| Condition | Specification |
|---|---|
| System Operating Temperature | Approximately 10°C–35°C |
| Meter Storage / Transport | Approximately 0°C–55°C |
| Test Strip Storage | Approximately 2°C–30°C |
The reusable meter and disposable test strips have different storage limits. Always follow the conditions applicable to the component being stored.
The Accurex Lipid Profile Meter may be useful in appropriate point-of-care workflows for:
The responsible healthcare professional or facility should determine the appropriate testing protocol and interpretation.
Microsidd carries both the Accurex Lipid Profile Meter and the ACON QuikCheck Cholesterol Monitor, but they are designed for different testing requirements.
| Parameter | Accurex | QuikCheck |
|---|---|---|
| Total Cholesterol | ✓ | ✓ |
| HDL | ✓ | — |
| Triglycerides | ✓ | — |
| LDL | Calculated where applicable | — |
| TC/HDL Ratio | Calculated | — |
| Primary Testing Role | Broader lipid-profile testing | Total Cholesterol testing |
Read the Complete QuikCheck vs Accurex Comparison →
View ACON QuikCheck Cholesterol Monitor →
Microsidd has created a detailed Accurex knowledge cluster covering system selection, strip compatibility, testing, storage, troubleshooting and result interpretation.
Learn how the LPM-101 platform works, which lipid parameters it measures, supported specimens and system specifications.
Read the Accurex Complete Guide →
Compare LPS-101, TCS-101, TGS-101 and HLS-101 before purchasing test strips.
Read the Accurex Strip Compatibility Guide →
Follow the complete testing workflow including code-chip matching, specimen selection and sample application.
Read the Accurex Step-by-Step Usage Guide →
Learn correct strip storage, expiry management, opened-canister handling and temperature requirements.
Read the Accurex Storage Guide →
Understand E-1, E-2, E-3, E-4, E-6 and E-7, plus HI/Lo, code-chip, battery and optical problems.
Read the Accurex Troubleshooting Guide →
Learn about control-solution testing, optical verification, OH/FL results and system-performance checks.
Read the Accurex QC & Optical Verification Guide →
Understand why point-of-care results may differ from laboratory lipid-profile results.
Read Accurex Accuracy vs Laboratory Lipid Profile →
Compare the specimen types supported by the LPM-101 and their different handling requirements.
Read the Accurex Specimen Guide →
Microsidd India supplies diagnostic devices and compatible consumables from Bengaluru to customers across India, subject to availability and courier serviceability.
For customers in Bengaluru, Microsidd India is based in RT Nagar, Bengaluru and supplies diagnostic and laboratory products to healthcare professionals, laboratories, clinics and other customers.
Learn More About Microsidd India in Bengaluru →
Customers who are unsure whether they require a Total Cholesterol meter or a multi-parameter lipid-profile system should verify their testing requirements before ordering.
It is a portable Blood Lipid Analysis System designed for quantitative lipid testing using compatible Accurex dry-chemistry test strips.
With the LPS-101 lipid panel, it directly measures Total Cholesterol, HDL and Triglycerides and can calculate LDL and TC/HDL ratio.
No. LDL is calculated from the measured lipid values under the applicable manufacturer calculation conditions.
Yes. HDL Cholesterol is directly measured with the appropriate compatible strip system.
Yes. Triglycerides are directly measured.
Yes. The compatible system can calculate the Total Cholesterol-to-HDL ratio.
The 3-in-1 LPS-101 lipid panel requires approximately 35 µL of specimen.
The LPM-101 provides TC, HDL and TG results in approximately 120 seconds.
Yes. Capillary whole blood is supported.
Yes. Appropriate venous whole blood is supported according to the manufacturer's specimen instructions.
Yes. Serum is a supported specimen type.
Yes, subject to the manufacturer's specimen-preparation and anticoagulant limitations.
The LPM-101 platform supports designated strip references including LPS-101, TCS-101, TGS-101 and HLS-101.
No. The current Microsidd product listing is for the reusable Accurex Lipid Profile Meter. Compatible disposable test strips must be purchased separately.
No. Every lipid measurement requires the appropriate compatible single-use test strip.
No. QuikCheck and Accurex use different analytical platforms and their test strips are not interchangeable.
The Accurex Blood Lipid Analysis System stores up to approximately 500 records.
The manufacturer specifies an operating range of approximately 10°C–35°C.
Compatible lipid test strips are generally stored at approximately 2°C–30°C, subject to the instructions supplied with the exact strip lot.
The system provides quantitative point-of-care lipid measurements, but laboratory confirmation remains appropriate for diagnosis, unexpected results, treatment decisions and other clinically important situations.
The Accurex Lipid Profile Meter is an in-vitro diagnostic point-of-care Blood Lipid Analysis System and should be used only with compatible test strips and according to the current manufacturer instructions.
Before every test, verify:
Point-of-care lipid results should be interpreted in the appropriate clinical context. Unexpected, abnormal or clinically important lipid results should be confirmed using an appropriate laboratory method where indicated and interpreted by a qualified healthcare professional.
Diagnostic devices and associated diagnostic consumables are non-returnable and non-exchangeable.
Please verify the meter model, required lipid parameters, compatible test-strip reference and pack configuration before placing your order.
Genuine cases involving an incorrect product received will be handled separately according to Microsidd.com's applicable policies and applicable law.
An original, continuous, unedited and uncut unboxing video is required when making a claim regarding an incorrect product received.
Read practical guides covering lipid testing, cholesterol meters, diagnostic devices, test-strip compatibility, troubleshooting and laboratory diagnostics.
| Specification name | Specification Value |
|---|---|
| Cholesterol analyte measured | Total cholesterol (TC), HDL cholesterol, Triglycerides, LDL cholesterol, Cholesterol ratio |
| Color pattern | White |
| Display technology | LCD |
| Power source | Rechargeable |
| Test format | Digital |
| Test sample | Blood |
