The Accurex Lipid Profile Test Strips – 25 Pack are genuine dry-chemistry Blood Lipid Test Strips designed for use with the compatible Accurex Lipid Profile Meter / Blood Lipid Analysis System.
The 3-in-1 lipid panel directly measures three important lipid parameters from one compatible test:
Using these directly measured values, the compatible Accurex meter can also calculate:
Each pack contains 25 single-use lipid profile test strips for compatible point-of-care lipid testing.
Important: this listing is for the test strips only. The reusable Accurex Lipid Profile Meter is not included and must be purchased separately.
View the Compatible Accurex Lipid Profile Meter →
| Specification | Details |
|---|---|
| Brand | Accurex |
| Product Type | Blood Lipid Test Strips / Lipid Profile Test Strips |
| Pack Size | 25 Test Strips |
| Panel Type | 3-in-1 Lipid Panel |
| Total Cholesterol | Directly measured |
| HDL Cholesterol | Directly measured |
| Triglycerides | Directly measured |
| LDL Cholesterol | Calculated by compatible meter when applicable |
| TC/HDL Ratio | Calculated by compatible meter |
| Technology | Dry chemistry / timed-endpoint photochemical analysis |
| Optical Measurement | Approx. 620 nm |
| Supported Specimens | Capillary whole blood, venous whole blood, serum and plasma |
| Sample Volume | Approximately 35 µL |
| Result Time | Approximately 2 minutes |
| Operating Temperature | Approximately 10°C–35°C |
| Strip Storage | Approximately 2°C–30°C |
| Calibration | Matching code-chip system |
| Usage | Single use only |
The 3-in-1 Accurex lipid panel directly determines:
TC + HDL + TG
from one compatible test-strip procedure.
The meter can then use those measured values to calculate:
LDL + TC/HDL Ratio
This provides substantially more lipid information than a Total Cholesterol-only strip.
| Parameter | Result Type |
|---|---|
| Total Cholesterol – TC | Measured directly |
| HDL Cholesterol | Measured directly |
| Triglycerides – TG | Measured directly |
| LDL Cholesterol | Calculated |
| TC/HDL Ratio | Calculated |
With the 3-in-1 lipid panel, LDL is calculated from the directly measured Total Cholesterol, HDL and Triglyceride results.
When values are expressed in mg/dL, the applicable formula is:
LDL = TC − HDL − TG/5
The manufacturer specifies this LDL calculation when the triglyceride concentration is approximately 400 mg/dL or lower.
Calculated LDL should not be confused with a direct LDL laboratory assay.
These strips are designed for the compatible:
Accurex Blood Lipid Analysis System / Lipid Profile Meter
View the Accurex Lipid Profile Meter →
The meter is reusable, while each test strip is a single-use diagnostic consumable.
These strips should not be treated as universal cholesterol or lipid strips.
Do not use them with:
Even if two diagnostic strips look similar, that does not establish compatibility.
The LPM-101 Blood Lipid Analysis System supports several strip references:
| Strip Reference | Test |
|---|---|
| LPS-101 | 3-in-1 lipid panel: TC + HDL + TG, with calculated LDL and TC/HDL ratio |
| TCS-101 | Total Cholesterol only |
| TGS-101 | Triglycerides only |
| HLS-101 | HDL Cholesterol only |
The current Microsidd 25-strip product is the 3-in-1 lipid-profile configuration for TC, HDL and TG testing.
Read the Complete Accurex Test Strip Compatibility Guide →
The 3-in-1 Accurex Blood Lipid Test Strip requires approximately:
35 µL of specimen
The manufacturer recommends using a suitable capillary transfer tube or pipette to collect and apply the required volume.
Do not estimate the sample quantity by eye when accurate volume collection is available.
The compatible meter provides the lipid-panel result in approximately:
2 minutes.
During testing, leave the strip fully inserted and do not add additional specimen after the measurement has begun.
The Accurex Blood Lipid Test Strip system supports:
The meter's selected specimen type should correspond to the actual sample being tested.
Specimen preparation and anticoagulant requirements vary between sample types.
Read the Accurex Capillary vs Venous Blood, Serum & Plasma Guide →
For fingertip capillary testing, the manufacturer instructs users to:
This procedure should be followed according to the current instructions supplied with the meter and strips.
The Accurex system uses a code-chip calibration system.
The manufacturer instructs users to use the code chip supplied with the test-strip package.
Before testing:
Using an incorrect code chip can produce inaccurate results.
The manufacturer specifies storage in the original sealed pouch or canister at approximately:
2°C–30°C
Important storage rules include:
Read the Accurex Lipid Profile Test Strips Expiry, Storage & Temperature Guide →
The controlling expiry for the test strips is the manufacturer expiry date printed on the actual canister or foil pouch.
Do not determine current stock expiry from:
Always check the physical pack supplied to you.
The canister should normally be opened only long enough to remove the strip required for immediate testing, then closed tightly.
If a canister has been left open or exposed to unsuitable temperature, moisture or contamination, strip integrity may be uncertain.
Professional users should follow appropriate quality-control procedures before relying on questionable stock.
Handle the strip by the appropriate handling area.
Do not touch the reagent region because contamination, moisture or oils from the fingers can interfere with the intended analytical process.
Discard strips that are:
Each Accurex lipid strip is intended for one test only.
Never:
The required specimen should be applied correctly in one testing procedure.
If the strip is inadequately filled or the test fails because of specimen application:
Read the Full Step-by-Step Accurex Usage Guide →
Accurex and QuikCheck strips may both be associated with cholesterol testing, but they perform very different functions.
| Feature | Accurex Lipid Profile Strips | QuikCheck Cholesterol Strips |
|---|---|---|
| Total Cholesterol | ✓ | ✓ |
| HDL | ✓ | — |
| Triglycerides | ✓ | — |
| LDL | Calculated where applicable | — |
| Interchangeable? | No | |
Read: QuikCheck Total Cholesterol Meter vs Accurex Lipid Profile Meter →
Confirm the following before placing your order:
Understand the complete LPM-101 blood-lipid testing platform, measured parameters, sample types and system specifications.
Read the Accurex Complete Guide →
Compare LPS-101, TCS-101, TGS-101 and HLS-101 before purchasing consumables.
Read the Accurex Compatibility Guide →
Follow code-chip setup, specimen preparation, sample application and the complete testing workflow.
Read the Accurex How-to Guide →
Learn correct storage, printed expiry management, temperature limits and strip handling.
Read the Accurex Storage Guide →
Understand common meter, code-chip, strip, battery and environmental errors.
Read the Accurex Troubleshooting Guide →
Learn how to verify the analytical system when strip or meter performance is in question.
Understand why point-of-care lipid results may differ from laboratory results.
Read Accurex Accuracy vs Laboratory Lipid Profile →
If you are purchasing the strips for the first time and do not already own the compatible meter:
View the Accurex Lipid Profile Meter →
The reusable meter and disposable strips are separate products on Microsidd.com.
Microsidd India supplies diagnostic devices and compatible test consumables from Bengaluru to customers across India, subject to product availability and courier serviceability.
For customers in Bengaluru, Microsidd India operates from RT Nagar, Bengaluru and supplies diagnostic and laboratory products to clinics, laboratories, healthcare professionals and other customers.
Learn More About Microsidd India in Bengaluru →
They are dry-chemistry Blood Lipid Test Strips designed for quantitative lipid testing with the compatible Accurex Blood Lipid Analysis System.
This product contains 25 test strips.
No. This product listing is for the test strips only. The compatible reusable meter is sold separately.
It directly measures Total Cholesterol, HDL Cholesterol and Triglycerides.
No. The compatible meter calculates LDL from TC, HDL and TG when the manufacturer's applicable calculation conditions are met.
The manufacturer states that the calculation can be used when the triglyceride concentration is approximately 400 mg/dL or lower.
Yes. The compatible system can calculate the TC/HDL ratio from the measured results.
The 3-in-1 Blood Lipid Test Strip requires approximately 35 µL.
The manufacturer specifies approximately 2 minutes.
Yes. The manufacturer's procedure specifically describes capillary blood collection.
Yes. Venous whole blood is supported according to the manufacturer's specimen instructions.
Yes. Serum is a supported specimen type.
Yes, subject to the manufacturer's specimen preparation and anticoagulant requirements.
Yes. Use the code chip supplied with the current strip package and confirm that its code matches the strip pack before testing.
No. QuikCheck and Accurex are different analytical systems and their consumables are not interchangeable.
No compatibility should be assumed. Use the strips only with the manufacturer-designated compatible Accurex system.
The manufacturer specifies storage at approximately 2°C–30°C in the original sealed package, protected from direct sunlight.
No. The manufacturer specifically instructs users not to freeze the test strips.
Use the expiry date printed on the actual test-strip canister or foil pouch supplied with your batch.
No. Every lipid measurement requires a new single-use strip.
The Accurex Blood Lipid Test Strips are in-vitro diagnostic consumables and should be used only with the compatible meter and according to the manufacturer's current instructions.
Before testing, verify:
Lipid results should be interpreted in the appropriate clinical context. Unexpected, abnormal or clinically significant results should be evaluated by an appropriate healthcare professional and confirmed using suitable laboratory testing where clinically indicated.
Diagnostic test strips are non-returnable and non-exchangeable.
Please verify the meter model, test-strip compatibility, required lipid parameters and pack size before placing your order.
Genuine cases involving an incorrect product received will be handled separately according to Microsidd.com's applicable policies and applicable law.
An original, continuous, unedited and uncut unboxing video is required when making a claim regarding an incorrect product received.
Read practical guides covering lipid testing, cholesterol meters, test-strip compatibility, storage, troubleshooting and laboratory diagnostics.
| Specification name | Specification Value |
|---|---|
| Cholesterol analyte measured | Total cholesterol (TC), HDL cholesterol, Triglycerides, LDL cholesterol, Cholesterol ratio |
| Color pattern | White |
| Medical device certification | CE |
| Test format | Test strip |
| Test sample | Blood |
