Care Sens N strips 50x2= 100's pack

₹1,800.00
₹2,600.00
Use with the CareSens N and CareSens N POP meters. These strips don’t require coding, which can speed up the testing process.
Availability: Out of stock
Free shipping
Delivery date: 1-2 days Metro Cities Only

CareSens Glucose Test Strips

Use with the CareSens N and CareSens N POP meters. These strips don’t require coding, which can speed up the testing process.

Features:

  • No coding 
  • Pre and post-meal flagging 
  • Pre and post-meal 14-day averaging 
  • 4 alarms (1 post-meal alarm and 3 settable alarms) 
  • USB Port to download data 
  • Compatible with CareSens PC Care Program and PC cable 
  • Easy-grip design 
  • 5-second test time 
  • Battery life of 1000 tests 
  • 250 test values can be stored with time and date 

How to use

CareSens N test strips don’t need manual coding and are designed to work with the CareSens N and the CareSens N POP meters.

A. PREPARING THE LANCING DEVICE

  1. Unscrew and remove the adjustable tip.
  2. Insert a new disposable lancet firmly into the carrier.
  3. Twist off and set aside the protective cover of the disposable lancet and replace the adjustable tip.
  4. Set the depth of penetration that you want to use; in thicker skin areas use a higher number; in thin sensitive skin areas use a lower number. Rotate the top portion of the adjustable tip until the setting number matches the arrow.
  5. Cock the lancing device by pulling on the sleeve until the device clicks.

B. PREPARING THE METER AND TEST STRIP

  1. Wash your hands and the site from which the blood will be drawn. 
  2. Gently insert the square end of the test strip into the meter port with its contact bars facing upwards. The (strip with blood drop) symbol should appear on the screen.
  3. Get a blood sample using your lancing device (see instructions above). 
  4. Touch the pointed tip of the strip into the blood droplet on your finger, keeping the test strip verticle to the blood broplet, making sure the blood fills up the small window on the black side of the strip. Note: You only need about 0.5μl of blood (about the size of a pinhead). 
  5. Once the blood sample has filled the confirmation window, the meter will beep. If the window hasn’t filled, an Er4 message will appear. 
  6. The test result will appear after the meter counts down from 5 to 1. The result will automatically be stored in the meter’s memory.

Note: the test strip must be inserted into your meter before applying blood to the pointed end. The meter does not require any manual coding. CareSens N blood glucose test strips are for use only in CareSens N and CareSens N POP meters. You have about 2 minutes to complete the test.